UKEN

Thank you!

Our manager will contact you as soon as possible

Pricing

Numberproductdescriptionpackagingpalletpacking

Glues and fugues

1

F-1 - a mixture on the basis of white cement, fillers and polymer modifiers for filling seams between ceramic, marble or other tiles. Has increased resistance to biological (fungus, mildew) and mechanical contamination.

Bucket
60 piece
2 kg
2

G-1 is a universal ground for deep penetration for the processing of concrete, brick, stone, plastered surfaces, plasterboard sheets and particleboard.

Canister
40 piece
5 kg
10 kg
1 kg
3

K-5 - cement-lime mix with modifiers, fillers and special additives for laying walls and partitions (in cold weather - K-5 (Winter) .Economic: does not allow the appearance of "bridges of cold", which improves the heat-protective properties of walls.

Bag
48 piece
25 kg
4

К-4 - a cement-sand mixture with fillers and modifiers for gluing of any kinds of materials: ceramic tile, ceramic granite, mosaic, greas, decorative stone.

Bag
48 piece
25 kg
5

К-8 «GRECE» - a cement-sand mixture with fillers and modifiers for covering floors with ceramic tiles, ceramic tiles or natural stone with water absorption of less than 1%.

Bag
48 piece
25 kg
6

K-1 - a cement-sand mixture with fillers, modifiers and polymers for wall and floor tiling with ceramic tiles or natural stone with water absorption of at least 1%.

Bag
48 piece
25 kg
7

K-7 - a cement-sand mixture with fillers and modifiers for facing surfaces exposed to heat (stoves, fireplaces, chimneys, floors with heating, etc.) with a tile size up to 300x300mm.

Bag
48 piece
25 kg
8

K-6 is a white-colored cement-sand mixture with fillers and modifiers for gluing marble slabs, mosaics and other light stone rocks.

Bag
48 piece
25 kg
9

K-5 - cement-limestone mixture with modifiers, fillers and special additives for wall and partition walls (in cold weather - K-5 (Winter).) Economical: does not allow the appearance of "bridges of cold", which improves the heat-protective properties of walls. -5 (Winter) is possible at a temperature not lower than 0 ° С, and a set of sufficient strength occurs within 3 days at a temperature not lower than -5 ° С.

Bag
48 piece
25 kg
10

F -2 - a mixture on the basis of cement, fillers and polymer modifiers for filling seams between ceramic, marble or other tiles. Has increased resistance to biological (fungus, mildew) and mechanical contamination.

Bucket
60 piece
3 kg
11

K-0 - cement-sand mixture with fillers and modifiers for wall and floor tiling with water absorption tile of not less than 3%. The recommended tile size is up to 300x300 mm.

Bag
48 piece
25 kg
12

К-10 - a cement-sand mixture with fillers and modifiers for gluing of any kinds of finishing materials: ceramic tile, ceramic granite, mosaic, gres, boards of supersize, decorative stone.

Bag
48 piece
25 kg

Mixtures for insulation systems

1

Ш-5 - plaster mix on the basis of white cement with fillers and polymer modifiers for creating decorative texture of "Koroid" type on concrete, cement-sand, cement-limestone bases, and also on reinforced layers in systems of insulation of facades.

Bag
48 piece
25 kg
2

GF-2 is a ground-based paint based on modified silicone, styrene-acrylic dispersion and quartz filler for the preparation of surfaces for decorative plasters of "Koroid" and "Shuba" type.

Bucket
36 piece
14 kg
3

GF-1 is a ground-based paint on the basis of styrene-acrylic dispersion and quartz filler for the preparation of surfaces for decorative plasters of "Koroid" and "Shuba" type.

Bucket
96 piece
36 piece
14 kg
2.8 kg
4

BK-1 "BETON CONTACT" - adhesive paint based on styrene-acrylic dispersion, quartz fillers and functional additives. BK-1 - a tool for pre-treatment of dense and smooth bases (monolithic concrete, massive concrete ceilings, concrete blocks, ceramic tiles) before applying any plaster, lime or cement putty and plaster on them.

Bucket
40 piece
7 kg
5

S-20 - Ready to use structural plaster based on silicone resin. It is used as a finishing coating of "bark" type on the facades.

Bucket
24 piece
25 kg
6

K-3 - a cement-sand mixture with fillers, modifiers and micro-reinforcement for the performance of protective reinforcing layer on polystyrene and mineral wool plates at installation of systems of insulation of facades.

Bag
48 piece
25 kg
7

К-2 - a cement-sand mixture with fillers and modifiers for polystyrene and mineral wool slabs at the installation of systems of insulation of facades.

Bag
48 piece
25 kg
8

K-3 - a cement-sand mixture with fillers, modifiers and micro-reinforcement for the performance of protective reinforcing layer on polystyrene and mineral wool plates at installation of systems of insulation of facades.

Bag
48 piece
25 kg
9

К-2 - a cement-sand mixture with fillers and modifiers for foam polystyrene plates at installation of systems of insulation of facades.

Bag
48 piece
25 kg
10

SH-7 - plaster on the basis of white cement with inert inorganic fillers and polymer modified additives for the creation of a decorative texture type "Shuba" on concrete, cement-sand, cement-limestone surfaces, as well as on reinforced layers in the systems of insulation of facades.

Bag
48 piece
25 kg
11

SH-5 - plaster mix on the basis of white cement with fillers and polymer modifiers for creating decorative texture of "Koroid" type on concrete, cement-sand, cement-limestone bases, and also on reinforced layers in systems of insulation of facades.

Bag
48 piece
25 kg
12

Acrylic plaster "coat" for decorative treatment of facades and walls with increased operational requirements inside the premises.

Bucket
24 piece
25 kg
13

K-9 - polymer-cement modified dry mix with fillers and microfibre for fastening of heat-insulating slabs of non-corrosive concrete on concrete, brick, plaster surfaces and performance of waterproofing reinforced layer in systems of insulation of facades of type "BETOL".

Bag
48 piece
25 kg
14

K-23 - fiber-reinforced polymer-cement modified dry adhesive mixture.

Bag
48 piece
25 kg

Plaster and putty gypsum

1

G-2 - a ground for processing of concrete, brick, stone, plastered surfaces, drywall sheets and chipboard.

Canister
5 kg
10 kg
2

SH-10 - high-quality plaster mix with fillers and modifiers of high-level linen for starting and finishing of concrete and plaster surfaces.

Bag
50 piece
20 kg
3

SH-6 - a dry spack mixture on the basis of gypsum with inert inorganic fillers and polymeric modifying additives. It is used for gypsum plasterboard bonding and for the starting alignment of concrete and plaster surfaces, filling of stamp, grooves, joints, joints between plasterboard slabs. For internal work.

Bag
66 piece
14 kg
4

SH-2 - a plaster mixture with fillers and modifiers for finishing alignment of concrete and plaster surfaces, drywall sheets. For internal work.

Bag
66 piece
500 piece
2 kg
14 kg
5

SH-0 - gypsum-sand mixture with fillers and special additives for leveling non-deformation surfaces (brick, concrete, aerated concrete). For internal work. Designed for manual application.

Bag
40 piece
200 piece
5 kg
30 kg
6

SH-1 - a gypsum mixture with fillers and special additives for leveling non-deformation surfaces (brick, concrete, aerated concrete, etc.). For internal work. Designed for both manual and machine application.

Bag
40 piece
30 kg

Plaster Plaster

1

В-3 - a limestone mixture with thin fillers for finishing smoothing of surfaces that do not undergo deformations (brick, concrete, aerated concrete, old plaster). For internal and external work.

Bag
66 piece
15 kg
2

В-2 - a limy-sand mixture with fillers for leveling surfaces with fluctuations of inequalities up to 5 mm and creation of decorative fine-grained texture of surfaces that are not subject to deformations (brick, concrete, aerated concrete). For internal and external work.

Bag
48 piece
23 kg
3

В-1 - a lime-sand mixture with fillers and micro-reinforcement for the initial alignment of surfaces that do not undergo deformation (brick, concrete, aerated concrete). For internal and external work.

Bag
48 piece
23 kg
4

UV-2 - environmentally friendly paint based on hydrated lime, fillers and technological additives.

Bucket
12.5 kg
6.5 kg
5

UV-1 - environmentally friendly paint based on hydrated lime, fillers and technological additives. It is used to create high-quality snow-white coatings on lime-sand, cement-sand, concrete or other surfaces.

Bucket
40 piece
6.5 kg
6

G-3 - high-quality silicate soil based on liquid glass and technological additives for the processing of concrete, cement, cement-limestone and lime surfaces of type "Shtuk".

Canister
5 kg
10 kg

Waterproofing

1

GI-2 - two-component elastic mix on the basis of cement and polymer binders with fillers and microarms.

Set (can 5l-1 pcs + bag.25 kg - 1piece)
25 kg
5 kg
2

GI-1 - a two-component high-elastic mix based on cement and polymer binders with fillers. Designed for waterproofing and protection of concrete or brick surfaces inside and outside the premises.

Set (can 10l-1 pcs + 1bag.25 kg - 1piece)
25 kg
5 kg
3

G-4 - a antifungal agent, is used for external and internal work to eliminate and prevent the appearance of various fungi (including mildew), lichens, algae, bacteria and yeast.

Canister
1 kg

Cement-lime plaster

1

SH-4 "MACHINE" - cement-lime mix with fillers and special additives for leveling concrete, brick, foam concrete surfaces. Designed for machine application. For external and internal works.

Bag
48 piece
25 kg
2

SH-3 - a mixture on the basis of gray cement with fillers and modifiers for leveling concrete and aerated concrete walls. For external and internal works.

Bag
48 piece
20 kg
3

SH -4 for leveling concrete, brick, foam concrete surfaces. For external and internal works.

Bag
48 piece
25 kg
4

SH-11 - cement-lime mix with fillers, perlite and special additives for leveling concrete, brick, foam concrete surfaces. For external and internal works.

Bag
48 piece
20 kg
5

Sh-8 - a dry spatula blend on the basis of white cement with fillers, modifiers and special additives for finishing the alignment of concrete and plaster surfaces, drywall, etc. inside and out of the premises, resistant to moisture.

Bag
48 piece
20 kg

Decorative materials

1

SP-1 - plaster on the basis of acrylic dispersion, colored sand and modifying additives for creating decorative texture on concrete, cement-limestone and cement-sand bases, drywall, in systems of insulation of facades.

Bucket
25 kg
4 kg
10 kg
2

SH-9 - ready to use polymeric putty on the basis of styrene-acrylic binder, modifying additives and mineral fillers of high lingerie. For internal work.

Bucket
24 piece
25 kg
3

PVA- Polyvinyl acetate water-based adhesive for internal work.

Bucket
1 kg
3 kg
4

A-20- Acrylic plaster "bark" for decorative treatment of facades and walls inside the premises.

Bucket
24 piece
25 kg
5

S-15 - Ready to use structural plaster based on silicone resin. Used as a finishing coat of the type "coat" on the facades.

Bucket
24 piece
25 kg
6

Bucket
25 kg
4 kg
10 kg

Floors

1

S-1 - a cement-sand mixture with fillers, microarms and special additives. It has the effect of light alignment and reduced adhesion to the instrument.

Bag
48 piece
25 kg
2

P-1 - self-leveling mixture on the basis of cement with inert inorganic fillers and polymer modifiers for leveling of horizontal bases under various coverings - tile, parquet, linoleum, carpet, laminate and others.

Bag
48 piece
25 kg

Paints

1

MF-3 -Double-dispersion interior paint

Bucket
44 pieces
15.6 kg
7.8 kg
1.56 kg
2

NF-1 - paint for interior work. Used for painting walls and ceilings. It forms a cloth-matt finish that allows light damp cleaning and re-coloring.

Bucket
44 pieces
3

FP7- Фасадна водно-дисперсійна фарба

Bucket
44 pieces
4

FS-4 - Dispersion latex paint for exterior and interior, vapor permeable, resistant to atmospheric influences, high adhesion and good decorative properties.

Bucket
44 pieces
14 kg
7 kg
3.5 kg
5

FN-5 is an atmospheric resistant acrylic paint for external and internal work.

Bucket
44 pieces
15.6 kg
6

FT9- Acrylic facade paint for coloring in saturated bright shades on the palette of MD COLOR on toning equipment

Bucket
44 pieces
13.32 kg
6.66 kg
7

MS-2- Latex matt paint for interior work.

Bucket
44 pieces
14 kg
7 kg
1.4 kg

Other

1

It is used for preparation of building solutions and other economic needs.

Bag
150 piece
5 kg
2

PSB-С-25 is used for insulation of floors, walls, roofs, facades of buildings.

3

PSB-С-35 is used in places with strong mechanical loads.

4

Gypsum construction general purpose Packaging - polyethylene bags of 2 kg and 5 kg.

Bag
200 piece
5 kg
Download full catalog in PDF format
download