UKEN

Thank you!

Our manager will contact you as soon as possible

VF-1 "VAPNYANKA-BILA"

Lime eco-paint
description:

UV-1 - environmentally friendly paint based on hydrated lime, fillers and technological additives. It is used to create high-quality snow-white coatings on lime-sand, cement-sand, concrete or other surfaces.

features:
  • - Based on lime
  • - Antibacterial, hypoallergenic
  • - Vapor-permeable (effect of breathable wall)
  • - Ready to use
order

Usage

UV-1 - environmentally friendly paint based on hydrated lime, fillers and technological additives. It is used to create high-quality snow-white coatings on lime-sand, cement-sand, concrete or other surfaces. Especially recommended for use with a complex of lime materials such as "Shtuk".

preparing basis

The base should be solid, level, cleaned of dust, dirt, friable areas. Before painting the surface with a silicate primer G-3.

preparing

Before use, thoroughly mix the paint at low speeds of the mixer. Before applying the main coating surface is recommended to treat the same paint, diluted with water in a proportion of 7: 1 (10-20% water). The color of the paint depends on the degree of absorption of the base, the structure of the surface, the method of application. For single-layered application, the estimated flow rate is about 200 g per 1 sq. M.

Technical parameters

Usage guide

  • VF-1 HEATING PAINT R. BUDMIKS.2.V.AS.BILA. DSTU B V.2.7 - 233
    2010
  • Tentative dilution
    200 g / m2 with single-layer application
  • Performance temperature
    from + 2 ° C to + 30 ° C
  • Drying time before use
    24 hours.
  • Guaranteed storage life
    18 months. from the date of manufacture
  • Packing
    plastic buckets of 6.5 kg

Use UV-1 with a brush, roller or paint sprayer. Apply the next layer 3 hours after the previous one.
For gentle, unsaturated shades, alkali-resistant dyes can be used for lime paints. Before work it is necessary to make a trial painting on a small plot.
The technical characteristics of the mixture and the recommendations for use were determined under standard conditions (t = 20 ° С, humidity 65%) and in real conditions may change.
The manufacturer guarantees the conformity of the products with the declared technical characteristics, subject to the rules of transportation, storage and compliance with this instruction.
The manufacturer does not bear responsibility for the unauthorized use of the material.

Download full catalog in PDF format
download