UKEN

Thank you!

Our manager will contact you as soon as possible

NF-1 PAINT "INTERIOR NORMAL"

Water-dispersive interior
description:

NF-1 - paint for interior work. Used for painting walls and ceilings. It forms a cloth-matt finish that allows light damp cleaning and re-coloring.

features:
  • White, matte
  •   Moisture-proof
  •   Resistant to abrasion
  •   High melting ability
order

Usage

NF-1 - paint for interior work. Used for painting walls and ceilings. It forms a cloth-matt finish that allows light damp cleaning and re-coloring. Designed for painting plaster, concrete, brick, plaster surfaces, as well as fiberboard, chipboard, wallpaper, including "Raufazer" fiber.

preparing basis

It is implemented according to DBN B.2.6-22-2001 and DSTU-N B A.3.1-23: 2013. It is necessary to remove dust, residues of lime whitewash, coating on adhesive and oil, other contaminants. The base should be clean, dry and suitable for treatment. Inequalities are aligned with a putty. Absorbing and chalky surfaces, plastered areas to be treated with a primer. Cracks need to be embroidered, grounded and shoved. The affected area is cleaned and treated with antiseptic solution according to the instructions.

preparing

COLORING: Possible by any dye intended for the coloring of acrylic paints, as well as specialized equipment for toning paints.

Technical parameters

Usage guide

  • MATTLATEX PREMIUM MF-3 TU 20.3-31158382-051
    2017
  • Composition
    suspension of pigments in aqueous acrylic dispersion with various auxiliary applications.
  • Solvent
    water
  • Consumption per layer
    80-100 ml / m2 depending on the base.
  • Drying time of one layer
    1-2 hours. at a base temperature of + 20 ° C and a relative humidity of 60%.
  • In other conditions
    the drying and shutting deadlines may change.
  • Performance temperature
    from + 5 ° C to + 30 ° C
  • Warranty period in hermetically sealed factory packaging
    18 months.
  • Bucket packing
    1 l (1,53 kg); 5 l (7.65 kg); 10 l (15.3 kg)

Mix thoroughly before use. Apply with a brush, roller or spray, including an airless method. Do not paint at a substrate temperature below + 5 ° C or relative humidity above 80%.
If necessary, use the recommendations of the technical monument. Primary coating: dilute the paint up to 10% water.
Finishing: Do not dilute the paint. Work tools immediately after the work is washed with water.

Download full catalog in PDF format
download