UKEN

Thank you!

Our manager will contact you as soon as possible

MS-2 PAINT «MATTLATEX STANDART»

For internal constructions
description:

MS-2- Latex matt paint for interior work.

features:
  • White
  • For internal work
  • Resistant to abrasion
  • Economic
order

Usage

MS-2. Latex matt paint for interior work. It forms a coating with high adhesion and the ability to wet cleaning. Designed for painting plaster, concrete, brick, plaster surfaces, as well as fiberboard, chipboard, QSB and OSB, plywood, wood, paint and varnish coatings, wallpaper.

preparing basis

The surface must be strong, clean, dry and suitable for treatment. Hard old coatings should be carefully removed. Inequalities and cracks are aligned with the finishing filler TM "BUDMIKS" SH-2 or SH-10. Durable alkyd and oil coatings to dry and dust. All surfaces are treated with the primer TM "BUDMIKS" G-1, according to the instructions. Fungus-affected areas to treat the antifungal TM "BUDMIKS" G-4, according to the instructions.

preparing

Colors: Possible by any dye intended for coloring of acrylic paints, as well as specialized equipment for toning of paints

Technical parameters

Usage guide

  • MATTLATEX STANDARD
    MS-2 TU 20.3-31158382-051: 2017.
  • Solvent
    Water.
  • Tentative breakdown
    175-200 g / m2.
  • Packing
    Bucket 1l (1.4kg); 5l (7kg); 10l (14kg).
  • Guaranteed storage life
    in a sealed factory package of 18 months.
  • Performance temperature
    from + 5 ° C to + 30 ° C

Mix thoroughly before use. The paint is applied to the surface with a brush, roller or paint spray (including airless) in 2 layers. 1 layer - paint is recommended to dilute up to 10% water. 2 layer - paint if possible not dilute. When applied with airless spraying, use a nozzle with a diameter of 0.66-0.79 mm and a pressure of 160-180 bar. When applied by air spraying, dilute water to working viscosity and use nozzle 2 mm.

EXPENSES: 175-200 g / m2. Exact cost is determined by trial painting on the object. To increase the stability of the surface to the damage by microorganisms add to the paint an antifungal TM "BUDMIKS" G-4 and mix thoroughly. The drying time of each layer is 1-2 hours at a basal temperature of + 20 ° C and relative humidity of 60%, in other conditions the drying time and the endurance can change. Application is carried out at a temperature of not less than + 5 ° С and relative humidity of air no more than 80%. Wash the working tools with water immediately after work is completed.

SAFETY AND ADMINISTRATION: Keep out of the reach of children. In case of contact with eyes immediately wash them with clean water. Do not pour paint into drains, ponds or on the ground. The remnants of the dried paint are recycled like ordinary debris.

STORAGE: In tightly closed containers, in warehouses at a temperature from + 5 ° С to + 30 ° С. Avoid getting direct sunlight on the packaging. Guaranteed storage life in sealed factory packaging for 18 months.

Download full catalog in PDF format
download