UKEN

Thank you!

Our manager will contact you as soon as possible

FT-9 PAINT «FASSADE MIX»

For external and internal works
description:

FT9- Acrylic facade paint for coloring in saturated bright shades on the palette of MD COLOR on toning equipment

features:
  • Base 3, transparent matte
  • For bright colors
  • High atmospheric resistance
  • High melting ability
order

Usage

Acrylic facade paint for tinting in saturated bright shades on palette MD COLOR on toning equipment. Use only in tinted form! The painted paint is intended for painting facades, as well as the creation of wear-resistant coatings indoors. It forms a water-repellent, moisture-proof, elastic and durable coating. Resistant to wet abrasion. It is suitable for painting cement plaster, concrete, brick, surfaces of systems of thermal insulation of facades, as well as on gypsum bases, drywall, fiberboard, QSB and OSB, plywood, wood and wallpaper inside the premises. Compatible with pigments from most European manufacturers. Does not contain solvents.

preparing basis

It is carried out in accordance with DBN B.2.6-22-2001 and DSTU-N B A.3.1-23: 2013. The surface must be strong, clean, dry and suitable for treatment. Dust, residues of lime whitewash, highs, mineral and oil-based coating, other contaminations thoroughly removed. Fresh cement plaster must be kept for at least 28 days, concrete - at least 3 months, the surface of the thermal insulation systems - at least 7 days, the surface, sealed with a cement putty - a minimum of 3 days. Durable alkyd and oil coatings to dry and dust. All surfaces need to be treated with a deep penetrating dbfa brand. Reinforce the cracks to ground and shovel. The affected area is cleaned and treated with an antiseptic dbfa Grund Antiseptic D613 in accordance with the instructions. Fasten the contrast surfaces with Fassade Normal paint, diluted with 5% water. If necessary, use the recommendations of the technical monument.

preparing

Colors: on the SELECT system or dyfa Vollton-und Abt nfarbe D230 dye. It is also possible to colorize the systems of other manufacturers.

Technical parameters

Usage guide

  • Fassade MIX FT-9 TY Y 20.3-31158382-053
    2017
  • Composition
    acrylic dispersion, fillers, auxiliary impurities
  • Solvent
    water
  • Consumption of one layer
    100-140 ml / ml, depending on the granularity of the base.
  • Performance temperature
    from + 5 ° C to + 30 ° C
  • Guaranteed storage life
    18 months in hermetically sealed factory packaging.
  • Packaging
    bucket 4.5 l (6.66 kg); 9l (13.32kg).

Apply with a brush, roller or spray, including an airless method. Shake the paint thoroughly before use. It is recommended to apply in 2 layers. Costs per layer - 100-140 ml / ml, depending on the granularity of the base. Exact cost is determined by trial painting on the object. Drying time before applying the next layer of 1-2 hours, 8-10 hours completely dry at temperatures bases + 20 ° C and a relative humidity of 60%. In other conditions, the drying and shutting deadlines may change. Works at a base temperature of + 5 ° C to + 30 ° C and at relative humidity of air no less than 80%. Do not apply paint on the surface under direct sunlight, with strong wind, precipitation. Protect dyed surfaces from precipitation and frost until the paint dries to a minimum of one day. Wash the tools with water immediately after work.

COLORING: By the SELECT system or dyfa Vollton-und Abt nfarbe D230 dye. It is also possible to colorize the systems of other manufacturers.

Guaranteed storage life: 18 months in hermetically sealed factory packaging.

Download full catalog in PDF format
download