UKEN

Thank you!

Our manager will contact you as soon as possible

FN-5 PAINT «FASSADE NORMAL»

Facade is water-dispersive
description:

FN-5 is an atmospheric resistant acrylic paint for external and internal work.

features:
  • White, matte
  •   High atmospheric resistance
  •   Resistant to sun rays
  •   High melting ability
order

Usage

FN-5-weather-resistant acrylic paint for external and internal work. It forms a water-repellent, moisture-proof, elastic and durable coating. Stretch to wet abrasion. Designed to color the facades of buildings and to create durable and moisture-resistant coatings indoors. Suitable for painting cement plaster, concrete, brick, surfaces of systems of thermal insulation of facades, as well as on gypsum bases, drywall, fiberboard, chipboard, QSB andOSB, plywood, wood and wallpaper inside the premises.

preparing basis

It is carried out according to DBN B.2.6-22-2001 and DSTU-N B A.3.1-23: 2013. The surface should be clean, dry and suitable for treatment. Pill, residues of lime whitewash, vials, mineral and oil-based coatings, and other contaminations thoroughly removed. Fresh cement plaster must be kept for at least 28 days, concrete -3 months, the surface of the thermal insulation systems-at least 7 days, the surface, sealed with a cement putty, a minimum of 3 days. Humidity based should not exceed 4%, gypsum bases -1%. Proper alkyd and oil coatings to defuse and decontaminate. All surfaces need to be treated with primer. Cracks to embroider, topless and shuffle. Fogged places are cleaned and treated with antiseptic solution. If necessary, use the recommendations of the technical monument.

preparing

Colors: Possible by any dye intended for the coloring of acrylic paints, as well as specialized equipment for toning paints.

Technical parameters

Usage guide

  • FASSADE NORMAL FN-5 TU 20.3-31158382-051
    2017
  • Composition
    acrylic dispersion, titanium dioxide, auxiliary impurities.
  • Solvent
    water
  • Consumption of one layer
    100-140 ml / m2 depending on the granularity of the base.
  • Exact cost
    determined by trial staining on the object.
  • Drying time of one layer
    1-2 hours
  • Complete drying
    8-10 hours, at a basal temperature + 20 ° C and relative humidity of 60%.
  • In other conditions
    the drying and shutting deadlines may change.
  • Warranty period in hermetically sealed factory packaging
    18 months.
  • Bucket packing
    10l (15.6kg), 5l (7.8kg), 2.5l (3.9kg)

Brush, roller or spray, including airless. Mix thoroughly before use. Primary coating: dilute the paint up to 10% water.
Finishing: Do not dilute the paint. Surfaces that are prone to the action of microorganisms, painted with the addition of an anti-slurry impurity in the paint. The work is carried out at a base temperature of + 5 ° C to + 30 ° C and with relative humidity below 80%. Do not apply paint on the surface under direct sunlight, with strong wind, precipitation. Protect dyed surfaces from precipitation up to a complete drying of paint for at least one day. Clean tools immediately after work.

Download full catalog in PDF format
download