(0)

Позвоните нам

+38 (098) 644 00 33 +38 (098) 644 00 50

Ваша заявка успешно принята!

Ожидайте звонка оператора.

SH-5 SHOOTING "CARROID PREMIUM"

SH-5 SHOOTING "CARROID PREMIUM"
☑ В наличии
описание:
Ш-5 - plaster mix on the basis of white cement with fillers and polymer modifiers for creating decorative texture of "Koroid" type on concrete, cement-sand, cement-limestone bases, and also on reinforced layers in systems of insulation of facades.
Преимущества:

Применение

подготовка базы

приготовление

Технические характеристики

Инструкция по применению

Доставка

Оплата

  • SUMISH SH-5 COLOR 1. ST 4 WHITE DSTU B V.2.7-126
    2011
  • Approximate SH-5 dispersion (1.5)
    2.3-2.7 kg / m2
  • Tentative dilution of SH-5 (2.5)
    3.3-3.4 kg / m2
  • Volume of water for mixing
    0,20 - 0,22 l / kg (5,0 - 5,5 l / bag)
  • Strength of the clutch with the base
    not less than 0,5 MPa
  • Performance temperature
    from + 5 ° C to + 30 ° C
  • Guaranteed storage life
    12 months. from the date of manufacture
  • Packaging
    paper bags of 25 kg
"

Apply the mortar using a metal grater or poluterker. After leveling the layer to a given grain thickness, create the desired texture of the surface with a plastic grater.
The time until the texture is formed (5-15 min.) Is determined visually: plastic grass press slightly to the surface and inspect - the mortar should not stick to the grinder. The time between the beginning and the end of the invoice is limited and depends on the quality of the preparation of the base, the consistency of the mixture, the temperature of the environment and humidity. At t 20 ° C and 60% humidity is not less than 30 minutes. Do not allow the drying of the edges of the applied mortar mixture - when applying the next strip of plaster joints will be noticeable - to perform work using the wet method wet. Painting can be done with any facade paints no earlier than 3 days after applying plaster.
The technical characteristics of the mixture and the recommendations for use were determined under standard conditions (t = 20 ° С, humidity 65%) and in real conditions may vary.
The manufacturer guarantees the conformity of the products with the declared technical characteristics, subject to the rules of transportation, storage and compliance with this instruction.
The manufacturer does not bear responsibility for the unauthorized use of the material.

Информация о доставке
Информация об оплате
Каталог продукции
Скачать полный каталог продукции в PDF
скачать