UKEN

Thank you!

Our manager will contact you as soon as possible

A-15 SHOCK "POSAD-ACRYL"

For external and internal works
description:

Acrylic plaster "coat" for decorative treatment of facades and walls with increased operational requirements inside the premises.

features:
  • White
  • Sheet invoice
  • For external and internal works
  • Water repellent
  • The grain size is 1.5 mm
order

Usage

A-15 - Acrylic plaster "coat" for decorative treatment of facades and walls with increased operational requirements inside the premises. It forms weatherproof, elastic, wear-resistant and resistant to heavy rain coverings. The plaster texture hides small defects in the surface. Suitable for application on mineral plasters, concrete, prepared brick floor, surfaces of systems of thermal insulation of facades, drywall, chipboard, QSB and OSB and others.

preparing basis

It is implemented according to DBN B.2.6-22-2001 and DSTU-N B A.3.1-23: 2013. The surface should be clean, dry and durable. Separation, old coatings and oil contamination carefully removed. Inequalities are aligned with a putty. Cement plaster should be kept for at least 14 days, putty surfaces - at least 3 days, the surface of insulation systems - 7 days. All surfaces should be treated with soil paint of TM "BUDMIKS" GF-1. When using painted plaster, the ground-paint should be tinted in the same color. Surfaces that absorb and absorb moisture, pre-treated with a deep penetration primer of TM "BUDMIKS" G-1, according to the instructions. Places affected by fungi, clean and treat antifungal TM "BUDMIKS" G-4 "ANTIGRIB", according to the instructions.

preparing

If necessary, up to 2% of water can be added to the plaster. Shuffle without breaking. Apply a stainless steel spatula on the wall to the thickness of the grain, to stand for a while.

Technical parameters

Usage guide

  • FASSSADE-ACRYL STANDARD
    A-15 TU 20.3-31158382-052: 2017.
  • Consumption
    Approximately 2.4 kg / m².
  • Exact cost is determined by
    test plotting on the object.
  • Drying time
    24 hours at + 20 ° C and humidity 65%.
  • Full drying and repainting
    2-3 days later.
  • In other conditions
    time will change, with a decrease in temperature - will increase.
  • Packaging
    Bucket 25 kg.

Shuffle without breaking. Apply a stainless steel spatula on the wall to the thickness of the grain, to stand for a while. While the surface is soft, structure the plastic grater in a circular direction until the texture is received in the form of densely enclosed pebbles. Large areas of the surface are broken up into several small ones or work in a group. The entire surface should be treated with the wet-wet method. If necessary, up to 2% of water can be added to the plaster. Perform work at temperatures from + 5 ° C to + 30 ° C and humidity below 80%. Do not apply under direct sunlight. Protect from precipitation and freezing for 3 days. Rinse the tools immediately after the work is complete. It is recommended to add additional antifungal properties to the plaster before applying an anti-freeze admixture to the plaster and mix thoroughly.

EXPENDITURE: Approximately 2.4 kg / m². The exact expense is determined by the test drawing on the object.

COLORING: Possible by any dye intended for coloring acrylic paints, as well as specialized equipment for toning paints. Put on a single plane (wall) a plaster with one batch number or carefully mix the products from different batches together!

EXPANSION TIME: 24 hours at + 20 ° C and humidity 65%. Complete drying and repainting in 2-3 days. In other conditions, the time will change, with a decrease in temperature - will increase.

SAFETY AND DUST PROTECTION: Keep out of the reach of children. Avoid contact with plaster in eyes or on skin. Do not pour into drains, water or soil. The dried plaster is utilized as a construction waste.

STORAGE: In a dry place from + 5 ° C to + 30 ° C. Guaranteed shelf life in sealed packaging - 24 months.

Download full catalog in PDF format
download