UKEN

Thank you!

Our manager will contact you as soon as possible

F-2 FUGA "GREY"

Suture stitch
description:

F -2 - a mixture on the basis of cement, fillers and polymer modifiers for filling seams between ceramic, marble or other tiles. Has increased resistance to biological (fungus, mildew) and mechanical contamination.

features:
  • Excellent vapor permeability
  •   Natural antiseptic
  •   Free-level alignment
  •   White color
order

Usage

F -2 - a mixture on the basis of cement, fillers and polymer modifiers for filling seams between ceramic, marble or other tiles. Has increased resistance to biological (fungus, mildew) and mechanical contamination.

preparing basis

Works should be done not earlier than in 24 hours. after gluing the tile. Seams clean from dirt, dust, residue of glue. When working with a tile and a base with high water absorption seams should be moistened with water.

preparing

Pour into a container with a dry mixture a measured amount of clean water. With a metal spatula rubbing movements carefully mix the mixture with water to form a dough-like consistency. Stand for 5 minutes and then get over again.

Technical parameters

Usage guide

  • Mixture F -2 C.1. РШ2 ДСТУ Б В.2.7-126
    2011
  • The dilution depends on the seam and is
    about 0,5 kg / m2 (1 bucket per 6 m2)
  • Volume of water for mixing
    0,2 - 0,23 l / kg (about 0,6-0,7 l / bucket)
  • Suitability of the mortar mixture
    not less than 2,5 hours.
  • Width of the seam
    from 3 to 10 mm
  • Eradication
    no more than 0,5 g / m2
  • Frost resistance
    not less than 50 cycles
  • Performance temperature
    from + 5 ° C to + 30 ° C
  • Packaging
    plastic buckets for 3 kg of mixture

Apply the mortar to the surface with a rubber spatula or a grater, holding the tool at an angle of 45 ° to the surface. Seams are filled to the full depth. Collect the residue of the solution mixture and wipe the surface with a damp sponge. After drying the stitches, the formed plaque is gently removed with a dry clean cloth. The technical characteristics of the mixture and the recommendations for use were determined under standard conditions (t = 20 ° С, humidity 65%) and in real conditions may vary.

Download full catalog in PDF format
download