(0)

Позвоните нам

+38 (098) 644 00 33 +38 (098) 644 00 50

Ваша заявка успешно принята!

Ожидайте звонка оператора.

F-1 Fuga "WHITE"

F-1 Fuga "WHITE"
☑ В наличии
описание:
F-1 - a mixture on the basis of white cement, fillers and polymer modifiers for filling seams between ceramic, marble or other tiles. Has increased resistance to biological (fungus, mildew) and mechanical contamination.
Преимущества:

Применение

подготовка базы

приготовление

Технические характеристики

Инструкция по применению

Доставка

Оплата

  • SUMISH F-1 C.1. RH1 DSTU B V.2.7-126
    2011
  • The dilution depends on the seam and is
    about 0.4 kg / m2 (1 bucket per 5 m2)
  • Volume of water for mixing
    0,35 - 0,38 l / kg (0,7 - 0,75 l / bucket)
  • Suitability of a soluble mixture
    not less than 2,5 hours.
  • Width of the seam
    up to 6 mm
  • Eradication
    no more than 0,5 g / m2
  • Frost resistance
    not less than 50 cycles
  • Performance temperature
    from + 5 ° C to + 30 °
  • Guaranteed storage life
    12 months. from the date of manufacture
  • Packaging
    plastic buckets for 2 kg of mixture
"

Apply the mortar to the surface with a rubber spatula or a grater, holding the tool at an angle of 45 ° to the surface. Seams are filled to the full depth. Collect the residue of the solution mixture and wipe the surface with a damp sponge. After drying the seams, the resulting scouring is gently removed with a dry, clean cloth. The technical characteristics of the mixture and the recommendations for use were determined under standard conditions (t = 20 ° С, humidity 65%) and in real conditions may vary.

Информация о доставке
Информация об оплате
Каталог продукции
Скачать полный каталог продукции в PDF
скачать