UKEN

Thank you!

Our manager will contact you as soon as possible

Sh-9 "AKRIL-FINISH"

For internal constructions
description:

SH-9 - ready to use polymeric putty on the basis of styrene-acrylic binder, modifying additives and mineral fillers of high lingerie. For internal work.

features:
  • Snow white
  •   Plastic, simple and convenient in operation
  •   Good for grinding
  •   Does not contain harmful impurities
order

Usage

SH-9 - ready to use polymeric putty on the basis of styrene-acrylic binder, modifying additives and mineral fillers of high lingerie. For internal work. It is intended for the final alignment of plastered plaster, cement-sand, drywall and other surfaces inside the premises.

preparing basis

The surface before use of the material should be even, durable, cleaned of grease stains, dust, residues of paint or bitumen, without fragile areas. Cracks and irregularities need to be aligned with the start pad. The base with increased water absorption should be grounded on the soil of the G-1 or G-2, according to the instruction.

preparing

Polymer putty is ready for use

Technical parameters

Usage guide

  • SH-9 SHPAKLIVKA R. BUDMIKS.2.P.BD.BYLA DSTU B.V. 2.7-233
    2010
  • Tentative dilution
    from 0,7 kg / m2 in single-layered application
  • Shelf life of the mortar mixture
    not less than 60 minutes.
  • Recommended thickness of one layer
    0.2-1 mm
  • Strength of the clutch with the base
    not less than 0,3 MPa
  • Performance temperature
    from + 5 ° C to + 30 ° C
  • Guaranteed storage life
    12 months. from the date of manufacture
  • Packaging
    Plastic bucket 4 kg and 15 kg

Putty SH-9 uniformly to put on the basis of a metal spatula. The mixture can be diluted with water to 10% of the mass of the putty for the desired consistency. Drying time of putty is 4-6 hours. under normal conditions (t -20 ° C, humidity of air - 65%). After that, small irregularities are polished with a fine-grained sponge or a skin. After it's possible to ground, dye, paste the wallpaper, decorating, etc.

WARNING!

Protect from frost!

WARNING!

Put the putty in tightly closed containers at a temperature from + 5 ° C to + 30 ° C.

Download full catalog in PDF format
download