S-15 - Ready to use structural plaster based on silicone resin. Used as a finishing coat of the type "coat" on the facades.
Ready to use structural plaster based on silicone resin. Used as a finishing coat of the type "coat" on the facades. It is intended for application on mineral plasters, concrete, prepared brick basis, surfaces of systems of thermal insulation of facades, drywall, chipboard, QSB and OSB. Recommended for decoration of facades in places with high aggressive influence. Can be used to create durable wear-resistant coatings in the middle of the premises. Not suitable for surfaces with salt spots, as well as for surfaces made of plastic.
Preparation of the base is carried out in accordance with DBN B.2.6-22-2001 and DSTU-N B A.3.1-23: 2013. The surface should be clean, dry and durable. Separation, old coatings and oil contamination carefully removed. Inequalities are aligned with a putty. Cement plaster should be kept for a minimum of 28 days, putty surfaces - at least 3 days, the surface of insulation systems - 7 days. All surfaces must be treated with silicone soil paint of TM "BUDMIKS" GF-2. When applied to the system of facade insulation, the complex system includes, as a minimum: a system glue composition, system insulation panels, a system reinforced coating consisting of one or more layers, of which at least one must be reinforced, a systemic first coat, a system decorative finish (silicone decorative plaster, paint, etc.). Heat-insulating materials that can be applied to silicone plaster should have a thermal conductivity λ <0.05 W / (m • K). These materials include: foam polystyrene (density from 15 kg / m³ to 35 kg / m³); Mineral fiber (density from 70 kg / m³ to 175 kg / m³, compressive strength - minimum 10 kPa); plates of extruded polystyrene (density - minimum 25 kg / m³). When using painted plaster, the primer should be tinted in the same color. Surfaces that soak or absorb moisture, pre-treated with a deep penetrating primer TM "BUDMIKS" G-1 "PREMIUM". Frozen areas, cleaned, dried and treated with antifungal TM "BUDMIKS" G-4 "ANTIGRIB" according to the instructions. Surfaces containing highs should be cleaned. The metal parts on the outside of the system must be protected from corrosion.
If necessary, add up to 2-3% water and mix without breaking. Apply a stainless steel spatula on the wall to the thickness of the grain, to stand for a while.