UKEN

Thank you!

Our manager will contact you as soon as possible

A-20 "FASSADE - ACRYL" SHUTTLE

For external and internal works
description:

A-20- Acrylic plaster "bark" for decorative treatment of facades and walls inside the premises.

features:
  • White
  • Texture "bark"
  • For external and internal works
  • Water repellent
  • Grain size 2.0 mm
order

Usage

Acrylic plaster "bark" for decorative treatment of facades and walls in the middle of the premises. It is easy to apply, it is elastic, wear-resistant, with high adhesion. It forms weatherproof, resistant to heavy rain coverings. Suitable for application on mineral plasters, concrete, prepared brick floor, surfaces of systems of thermal insulation of facades, drywall, chipboard, QSB and OSB and others.

preparing basis

It is implemented according to DBN B.2.6-22-2001 and DSTU-N B A.3.1-23: 2013. The surface should be clean, dry and durable. Separation, old coatings and oil contamination carefully removed. Inequalities are aligned with a putty. Cement plaster should be kept for at least 14 days, putty surfaces - at least 3 days, the surface of insulation systems - 7 days. All surfaces must be treated with ground-color TM "BUDMIKS" GF-1. When using painted plaster, the ground-paint should be tinted in the same color. Precipitated surfaces and strongly absorb moisture, pre-treated with deeply penetrating primer TM "BUDMIKS" G-1, according to the instructions. Places affected by fungi to clean and treat the antifungal TM "BUDMIKS" G-4 ANTIGRIB, according to the instructions.

preparing

Shuffle without breaking. Apply a stainless steel spatula to the wall on the wall to the thickness of the grain. Hold for some time and, until the plaster is soft, to structure the plastic grater in the desired direction.

Technical parameters

Usage guide

  • FASSADE-ACRYL STANDARD A-20 TU 20.3-31158382-052
    2017
  • Consumption
    2.8 kg / m², the exact expense is determined by the test drawing on the object.
  • Drying time
    24 hours at + 20 ° C and humidity 65%.
  • Full drying and repainting
    2-3 days later.
  • In other conditions
    time will change, with a decrease in temperature - will increase.
  •   Warranty period in sealed packaging
    24 months.
  • Packaging
    25 kg plastic bucket

Shuffle without breaking. Apply a stainless steel spatula to the wall on the wall to the thickness of the grain. Hold for some time and, until the plaster is soft, to structure the plastic grater in the desired direction. Large surfaces are divided into several small plots or work in a group. The entire surface should be treated with the wet-wet method. If necessary, up to 2% of water can be added to the plaster. Perform work at temperatures from + 5 ° C to + 30 ° C and humidity below 80%. Do not apply under direct sunlight. Protect from precipitation and freezing for 3 days. Rinse the tools immediately after the work is complete. It is recommended to add additional antifungal properties to the plaster before applying an anti-freeze admixture to the plaster and mix thoroughly.

Download full catalog in PDF format
download