UKEN

Thank you!

Our manager will contact you as soon as possible

SP-1 PLASTER "MOSAIC" PISKOVIK

For external and internal works
description:

SP-1 - plaster on the basis of acrylic dispersion, colored sand and modifying additives for creating decorative texture on concrete, cement-limestone and cement-sand bases, drywall, in systems of insulation of facades.

features:
  • For internal and external work
  •   Resistant to abrasion and mechanical damage
  •   Easy to clean with water
  •   Does not burn and does not change the color on the facades
order

Usage

SP-1 - plaster on the basis of acrylic dispersion, colored sand and modifying additives for creating decorative texture on concrete, cement-limestone and cement-sand bases, drywall, in systems of insulation of facades. It is used on bases which are subjected to possible mechanical influences, as well as on bases with increased operational loads (corridors, stairs, bases, etc.).

preparing basis

The base should be even and durable, cleaned of contamination, residues of paints, fats, fragile areas. For 4 hours before application of plaster, prepare the base to apply primer paint GF - 1, which is recommended to zakorovat in tone of the mosaic.

preparing

SP-1 is made in the form of a mixture ready for use. Before starting work, mix the contents of the bucket to obtain a homogeneous consistency. If necessary, the addition of water is allowed no more than 5%.

Technical parameters

Usage guide

  • MIX IM-1 "Mosaic" R. BUDMIKS.1.P.IT.ZHIDNO palette ISO B V.2.7-233
    2010
  • Strength of the clutch with the base
    not less than 0,5 MPa
  • Packaging
    plastic buckets of 4 kg, 10 kg and 25 kg
  • Guaranteed storage life
    12 months. from the date of manufacture
  • Tentative breakdown "Mosaic" with a grain size of 1.2 mm
    3.5 kg per 1 m2 (4 kg bucket - 1.2 m2, 10 kg bucket - 3.0 m2, bucket 25 kg - 7.5 m2 )
  • The approximate dispersion of "Sandstone" with a grain size of 1.0 mm
    3.1 kg per 1 m2 (bucket 4 kg - 1.3 m2, 10 kg bucket - 3.2 m2, bucket 25 kg - 8 m2)
  • With a grain size of 2.0 mm
    5.5 kg per 1 m2 (bucket 4 kg - 0.7 m2, bucket 10 kg - 1.8 m2, bucket 25 kg - 4.5 m2)

Prepare the mixture with a metal grater or polterker. The thickness of the applied layer should correspond to the thickness of the filler grains. Excessive rubbing can lead to heterogeneity of surface coloration (stains). The time between the beginning and the end of the formation of the decorative layer is limited and depends on the quality of preparation of the base, consistency of the mixture, ambient temperature and humidity. At t 20 ° С and 60% humidity is not less than 20 minutes. High humidity and low air temperature considerably increase the time of drying plaster. After application, the plaster has a milky-blue color, which disappears during the formation of the film.
The specification of the plaster and the recommendations for use were determined under standard conditions (t = 20 ° C, humidity 65%) and in real conditions may vary.
The manufacturer guarantees the conformity of the products with the declared technical characteristics, subject to the rules of transportation, storage and compliance with this instruction.
The manufacturer does not bear responsibility for the unauthorized use of the material.

WARNING!

Protect from frost!

WARNING!

Store the plaster in tightly closed containers at a temperature from + 5 ° C to + 30 ° C.

Download full catalog in PDF format
download