UKEN

Thank you!

Our manager will contact you as soon as possible

SH-3 ''FASAD-START'' SLEEVE

Cement-limestone
description:

SH-3 - a mixture on the basis of gray cement with fillers and modifiers for leveling concrete and aerated concrete walls. For external and internal works.

features:
  • Gray color
  •   Waterproof and frost-resistant
  •   Reinforced with fiber
  •   Easy to use
order

Usage

SH-3 - a mixture on the basis of gray cement with fillers and modifiers for leveling concrete and aerated concrete walls. For external and internal works.

preparing basis

The substrate must be strong, even, cleaned of dirt, paint and fragile areas. If necessary, treat the soil G-1, in accordance with the instructions.

preparing

Gradually pour the mixture into a vessel with a measured amount of pure water while simultaneously manual or mechanical (at low revolutions), stirring until a homogeneous mass is obtained. Stand for 5 minutes and mix again.

Technical parameters

Usage guide

  • SUMISH SH-3 C.1. Sh T1 DSTU B V.2.7-126
    2011
  • Approximate dilution
    from 1 kg / m2 at a layer thickness of 1 mm
  • Volume of water for mixing
    0,3 - 0,35 l / kg (6.0 - 7.0 l / bag)
  • Shelf life of the mortar mixture
    not less than 2,5 hours.
  • Recommended thickness of one layer
    up to 3 mm
  • Strength of the clutch with the base
    not less than 0,3 MPa
  • Shrinkage
    no more than 0.5 mm / m
  • Performance temperature
    from + 5 ° C to + 30 ° C
  • Guaranteed storage life
    12 months. from the date of manufacture
  • Packaging
    20 kg paper bags

Put the putty with a wide spatula. After drying, small irregularities can be removed by rubbing a felt float. In hot and windy weather, the first three days of the putty surface should be shaded and periodically moistened.
The technical characteristics of the mixture and the recommendations for use were determined under standard conditions (t = 20 ° С, humidity 65%) and in real conditions may vary.
The manufacturer guarantees the conformity of the products with the declared technical characteristics, subject to the rules of transportation, storage and compliance with this instruction.
The manufacturer does not bear responsibility for the unauthorized use of the material.

Download full catalog in PDF format
download